供应BMW Multi Tool OBD2 CAS1-3

bmw multi  tool latest software v3.0
powerful than ak300!!!
欢迎咨询，电话tel：15889503376，qq：744236518
bmw multi tool includes forth parts, hardware device, dongle,programmer, software. before running software you must connectdongle and hardware device to computer.
new software update:v3.0, here is updatetips:
1.the software v3.0 must be run above firmware v1.0.4.
2.you can go to help->device update->device update to updateyour device to the newest version.
3.once you update your firmware when use v2.5 software. it does notneed update the firmware again.
4.add italian and spanish language.
5.normal bug fix.
description:
1. obd ii connector: connects the tool to the vehicle's data linkconnector (dlc).
2. dongle: usb dongle.
3. usb connector: connects the tool to the pc/laptop through usbcable.
4. programmer: program keys.
5. programmer female pin: connects programmer to device.
6. programmer male pin: connects programmer to device.
specifications:
1. operating temperature: -20 to 70 °c ( -4 to 158 °f )
2. storage temperature: -40 to 85 °c ( -40 to 185 °f )
3. diagnostic interface: 16 pin
4. usb interface: usb 2.0
5. power: dc 5 v - 12 v
6. consumption: 1 w
7. dimensions: length 95 mm, width 49 mm, height 28 mm
function:
bmw multi tool supported function including:
1. car access sytem dentification
2. read/write cas eeprom(obdii)
3. read/write km stored in cas system(obdii)
4. read/write synchronization codes stored in cassystem(obdii)
5. synchronize dme and cas(obdii)
6. synchronize cas and elv(obdii)
7. prepare dealer key for cas1/cas2/cas3/cas+(support latest cas3verison)(obdii)
8. read/restore cas key information(obdii)
9. disable/enable key with working key(obdii)
10. clear dtc and shadow (obdii)
11. prepare dealer key with cas eeprom dump
12. unlock dealer key prepared with our software with cas eepromdump or key information
13. change km in cas and instrument dashboard with file dump
14. have key programmer, you can programm dealer keydirectly.
pay attention to the function: help->device update. youcan get the latest software version and firmware verion when youcan access to internet.
1. menu:
- tool: you can choose language here, support english andchinese simplified restart software to apply your settings.
- file make key: you can prepare dealer key with ews and cas eepromdump.
- help: device update. you can get your device and dongle idversion and update it.
2. protocal type:
now bmt support there type of protocol: kwp-can bus 100kbps,kwp-can bus 500kbps, kwp-2000. auto detect  function canhelp you to choose the right protocol. after choose protocol okay,then press connect. if connected success. all cas info willdisplay in cas identification. include cas number, vin, productiondate, etc.
3. eeprom function:
read eeprom, write eeprom, save file, load file…
1). you should backup the cas eeprom before prepare dealer key.after succeed read eeprom, please save it as back file. this stepis very important.
2). now can't read the whole eeprom for cas3 system. but the mainsection is contained. it should be saved. when you read cas eeprom,it will give tips (press ok to continue).
4. odometer:
support read and change km stored in cas system.
don't support to change km in instrument. if you want to change thekm display in instrument. you should change km in cas system first.then modify the km in instrument manually.
5. synchronization codes:
1). cas3 code-dme, cas3code-egs: read and write dme and egs codestored in cas3 system.
2). synchronize dme and cas— this function will be useful whileprepare dealer key or any other operation which cause can't startthe engine.
3). synchronize cas and elv — this function can help clear wheelerrors
6. key learn
function introduction:
1). get key info: with this function you can get the key cutting,remote frequency, and key data.
2). save key info: save the read key info.
3). load key info: load the saved key info. to see the key data andprepare for write key info.
4). write key info: write the loaded key info into cassystem.
5). make dealer key: you can prepare dealer key after you get keyinfo successfully. also you should choose the key position.
6). add key: add the new dealer key into cas system. some cassystem needs this step to start the engine.
7). enable key: insert the current key into ignition switch, pressenable key. the key after current key will be enabled.
8). disable key: insert the current key into ignition switch, pressdisable key. the key after current key will be disabled.
9). clear dtc: before prepare dealer key and after it you can usethis function to clear dtc.
10). clear shadow: before prepare dealer key and after it you canuse this function to clear shadow.
7. file make key
1). choose cas or ews type.
2). load the choose eeprom file you will get the make dealer keywindow.
3). choose key position and press make dealer key button. flowthe given tips to prepare dealer key. after succeed you can savethe new eeprom dump file.
- for ews1, ews2, ews3, ews4, cas1, cas2, cas3 type the prepareddealer key can start the engine directly.
- for some ca3+ type you need to write back the new dump file intocar.
4). cas3 encrypt data, only obdii prepare make key is support forcas3 encrypt data.

---

深圳市顺瑞达电子科技有限公司
严生
15889503376
深圳布吉丹竹头地铁站 英郡年华

---

供应0.25级数字压力表
沧州厂家供应无缝双丝头DN80 材质20# 镀锌 喷砂
德式钳工锤
（PBT巴斯夫）德国代理商
供应台湾TTO骨架油封
供应BMW Multi Tool OBD2 CAS1-3
供应增压管硅胶管，涡轮增压管
珠海大容量登山包 印刷logo 登山包品牌大全
贵州旋转扣件报价鹏元愿与您携手同行
常德断桥铝门窗设备什么牌子好（多少钱）
襄阳市幸福暖通暖气片燃气壁挂炉
江苏万基(在线咨询),振动流化床,振动流化床工作原理
长沙别墅哪家好
浙江德马格摊铺机DF145CS提升油缸性能经久不衰
厂家直供宝塔纸管
托辊、镀锌滚筒、小滚筒
天津和平sat基础培训英兰让您自信流利说英语
无线导览 无线导览 无线导览无线导游系统
湖北荆门聚氨酯直埋式预制保温管技术要求
供应醇基燃料新助剂，第二代添加剂